[Fixed in 1.7.0] Unable to discover Brocade SX Switches

Unimus support forum
Post Reply
fremo229
Posts: 3
Joined: Wed May 09, 2018 5:21 pm

Wed May 09, 2018 5:28 pm

I am currently trying to add Brocade Fastiron SX 1600 switches to unimus via SSH. My brocade ICX 6610 switches work, but the SX 1600s do not seem to discover. It returns a "failed to discover" and "configure command" is not supported. The devices are Brocade Fastiron SX 1600 switches.

" net.unimus.core.cli.util.EnableHelper : Failed to switch to 'CONFIGURE' mode on '10.202.251.21' - 'configure' command not supported"
User avatar
Tomas
Posts: 480
Joined: Sat Jun 25, 2016 12:33 pm

Wed May 09, 2018 5:36 pm

Hi,

Could you please post the output of "show version" for the SX that's failing to discover?
(please strip any sensitive information)

Thanks!
fremo229
Posts: 3
Joined: Wed May 09, 2018 5:21 pm

Wed May 09, 2018 5:48 pm

Here you go


==========================================================================
Active Management CPU [Slot-9]:
SW: Version 07.3.00pT3e3 Copyright (c) 1996-2013 Brocade Communications System s, Inc.
Compiled on Jun 29 2015 at 00:47:26 labeled as SXR07300p
(4466248 bytes) Primary sxr07300p.bin
BootROM: Version 07.2.00T3e5 (FEv2)
Chassis Serial #: B62551H011
License: SX_V6_HW_ROUTER_IPv4_SOFT_PACKAGE (LID: yGFJJMjFFM)
HW: Chassis FastIron SX 1600-PREM (PROM-TYPE SX-FIL3U-6-IPV4)
==========================================================================
Standby Management CPU [Slot-10]:
SW: Version 07.3.00pT3e3 Copyright (c) 1996-2013 Brocade Communications System s, Inc.
Compiled on Jun 29 2015 at 00:47:26 labeled as SXR07300p
BootROM: Version 07.2.00T3e5 (FEv2)
HW: Chassis FastIron SX 1600-PREM (PROM-TYPE SX-FIL3U-6-IPV4)
==========================================================================
SL 1: SX-FI-24HF 24-port Gig Fiber
Serial #: BTS0447H01G
P-ASIC 0: type C300, rev 00 subrev 00
==========================================================================
SL 2: SX-FI-48GPP 48-port Gig Copper + PoE+
Serial #: BFV0416G02S
P-ASIC 2: type C300, rev 00 subrev 00
==========================================================================
SL 3: SX-FI-24HF 24-port Gig Fiber
Serial #: BTS0447H00T
P-ASIC 4: type C300, rev 00 subrev 00
==========================================================================
SL 5: SX-FI-8XG 8-port 10G Fiber
Serial #: BQK0420L01A
P-ASIC 8: type C341, rev 00 subrev 00
==========================================================================
SL 6: SX-FI-48GPP 48-port Gig Copper + PoE+
Serial #: BFV0441F01L
P-ASIC 10: type C300, rev 00 subrev 00
==========================================================================
SL 9: SX-FIZMR4 0-port Management
Serial #: W10447H007
License: SX_V6_HW_ROUTER_IPv4_SOFT_PACKAGE (LID: yGFJJMjFFM)
==========================================================================
SL 10: SX-FIZMR4 0-port Management
Serial #: W10444H02R
License: SX_V6_HW_ROUTER_IPv4_SOFT_PACKAGE (LID: yGFJJJjFHt)
==========================================================================
SL 11: SX-FI-48GPP 48-port Gig Copper + PoE+
Serial #: BFV0416G00K
P-ASIC 20: type C300, rev 00 subrev 00
==========================================================================
SL 12: SX-FI-48GPP 48-port Gig Copper + PoE+
Serial #: BFV0419G01B
P-ASIC 22: type C300, rev 00 subrev 00
==========================================================================
SL 15: SX-FI-48GPP 48-port Gig Copper + PoE+
Serial #: BFV0401G00P
P-ASIC 28: type C300, rev 00 subrev 00
==========================================================================
SL 16: SX-FI-48GPP 48-port Gig Copper + PoE+
Serial #: BFV0416G01F
P-ASIC 30: type C300, rev 00 subrev 00
==========================================================================
Active Management Module:
660 MHz Power PC processor 8541 (version 0020/0020) 66 MHz bus
512 KB boot flash memory
16384 KB code flash memory
512 MB DRAM
Standby Management Module:
660 MHz Power PC processor 8541 (version 0020/0020) 66 MHz bus
512 KB boot flash memory
16384 KB code flash memory
512 MB DRAM
The system uptime is 237 days 21 hours 23 minutes 36 seconds
The system started at 16:23:50 GMT-05 Wed Sep 13 2017

The system : started=cold start
User avatar
Tomas
Posts: 480
Joined: Sat Jun 25, 2016 12:33 pm

Wed May 09, 2018 6:11 pm

Thank you for the output, we found the issue.
Our current implementation only supported the F series (FSX, FWS, FLS, etc.).

We have fixed this, and will include the fix in 1.7.0 release.
(which is actually coming out later today)

I will post an update in this topic as well when we release 1.7.0.
fremo229
Posts: 3
Joined: Wed May 09, 2018 5:21 pm

Wed May 09, 2018 6:49 pm

Perfect
User avatar
Tomas
Posts: 480
Joined: Sat Jun 25, 2016 12:33 pm

Thu May 10, 2018 5:45 pm

1.7.0 has been released, please let us know if the fix for SX series works.

Thanks!
Post Reply