[Solved] Mass tagging

Unimus support forum
Post Reply
tommyd
Posts: 11
Joined: Mon May 13, 2019 9:44 am

Tue Nov 19, 2019 3:19 pm

Is there a way to add a tag to multiple devices at once? For example for devises displayed in Devices > Search.
User avatar
Tomas
Posts: 767
Joined: Sat Jun 25, 2016 12:33 pm

Tue Nov 19, 2019 3:37 pm

Yes, you can use "Device tags > select a tag > Tag devices".
You can select multiple devices as needed, search, etc.

Is that what you were looking for?
tommyd
Posts: 11
Joined: Mon May 13, 2019 9:44 am

Wed Nov 20, 2019 3:24 pm

Yes, you can use "Device tags > select a tag > Tag devices".
I was expecting the other way i.e. "find/select devices > add tad" but this also ok
User avatar
Tomas
Posts: 767
Joined: Sat Jun 25, 2016 12:33 pm

Wed Nov 20, 2019 5:18 pm

In the Devices page, you can select a device and add tags to it.
This is meant when you want to add multiple tags to a single devices.

In the Tags page, you can select a tag and tag devices with it.
This is meant when you want to tag multiple devices with a single tag.

We made it this way so it's possible to both tag a device with multiple tags, or tag multiple devices with a single tag.
(each operation being done on their respective screens)

Happy to hear if you have any suggestions on how to handle this better :)
Post Reply