Example.
If I run this push script on a router with no entries in the address list it works fine.
Commands
Code: Select all
/ip firewall address-list
add address=172.16.0.0/12 comment=Local_Access list="Allowed Access"
add address=10.176.0.0/13 comment=OSPF list="Allowed Access"
Code: Select all
<prompt> /ip firewall address-list
<prompt> add address=172.16.0.0/12 comment=Local_Access list="Allowed Access"
<prompt> add address=10.176.0.0/13 comment=OSPF list="Allowed Access"
<prompt>
Code: Select all
<prompt> /ip firewall address-list
<prompt> add address=172.16.0.0/12 comment=Local_Access list="Allowed Access"
failure: already have such entry
<prompt>
In the end I would just like to push my whole new ACL list to all my routers and fill in any missing address list entries if possible.