Hello,
Im new to Unimus but already loving it.
I added multiple devices like Mikrotik Cloudcore, Mikrotik CHR and Cisco routers.
But I would also like to add some Audiocodes mediant 500L devices.
According to the Wiki Audiocodes Mediant is supported but when I discover a Mediant 500L the message "unsupported device" comes up in the log.
Hopefully you can help me with this.
best regards,
Michael Brugge
[Fixed in 2.0.0] Support of Audiocodes Mediant 500L
Hello,
Happy to hear you are liking Unimus so far.
As for the AudioCodes Mediant 500L, can you please enable "Device output logging" under "Zones > Default > Debug mode"?
After this is enabled, run a discovery on this device, and wait for it to fail.
After it fails, please download the Device Output Log file.
Please create a ticket on the Portal, and attach the log file there.
We will then fix the AudioCodes driver as required.
Thanks!
Happy to hear you are liking Unimus so far.
As for the AudioCodes Mediant 500L, can you please enable "Device output logging" under "Zones > Default > Debug mode"?
After this is enabled, run a discovery on this device, and wait for it to fail.
After it fails, please download the Device Output Log file.
Please create a ticket on the Portal, and attach the log file there.
We will then fix the AudioCodes driver as required.
Thanks!
-
- Posts: 5
- Joined: Wed Aug 28, 2019 3:01 pm
Hi Tomas,
Ticket is raised.
If you add the following command to Unimus the Audiocodes shows you the full configuration.
"show running-config full"
Best regards,
Michael Brugge
Ticket is raised.
If you add the following command to Unimus the Audiocodes shows you the full configuration.
"show running-config full"
Best regards,
Michael Brugge