[Solved] strange problem with 1.10.3
Posted: Tue Jul 30, 2019 6:41 pm
I have a strange problem that I cannot figure out after updating to 1.10.3.
After the update, I have 5 devices that now always show backup failed when they worked before.
I've tried deleting these devices and re-adding them and still, the backup fails.
I have other devices in the same subnets that backup fine.
From the Unimus server, I can both ping and ssh into the devices fine.
They are 1 rocket M5 and 4 rocket M2 radios.
I have other rocket M5 and M2 radios that backup fine, running that same firmware as the failing ones.
In the logfile I get the following:
2019-07-30 12:57:55.778 WARN 4216 --- [backup-2] n.u.c.d.v.u.UbntUniversalBackupDriver : Output recognition timeout reached while trying to talk to IP ADDRESS HERE!
2019-07-30 12:57:55.778 WARN 4216 --- [backup-2] n.u.c.d.v.u.UbntUniversalBackupDriver : Unable to download backup from 'IP ADDRESS HERE' - 'Expect operation fails (timeout: 95000 ms) for matcher: anyOf(regexp('(?i)(?:wrong|invalid|incomplete|incorrect|bad|ambiguous|unrecognized|unsupported|unknown|no matching) (?:command|input|usage|action|entry)|(?:not enough|invalid|bad) (?:parameters?|arguments?)|command (?:unknown|failed)|command.+(?:not found|not recognized|not supported|not available)|parsing error|command parser? error|(?:failed|not possible).+(?:check|try) again|expected end of command|sh: .+: not found|(?m)^(?-m)failure:.+|\^ ?(?:keyword|command|input) mis[- ]?match|syntax error.+|invalid syntax'),regexp('(?i)(?:permission|access) (?:denied|refused|forbidden)|(?:don't|doesn't|do not|does not) have (?:permission|access|authorization)|(?:bad|invalid|incorrect) (?:secrets?|password)|authorization (?:failed|failure|denied|refused)'),regexp('(?i).+: .+: (?:no such file|not found)'),TailingRegexp('(?i)(?m)^(?-m)\d?(?:X[MWCS]|WA|TI|AF.*?|SW|US|BZ)\d?(?:\.v\d+?\.\d+?(?:\.\d+?){0,2}(?:-[Uu]\d+?|-RC.*?|-beta.*?|-cpu.*?)?)?# $', 250))'!
But like I said from the command line on the Unimus server I can both ping said IP address and SSH into it from the command line.
So I'm not sure what to check next.
The one thing I have not tried is rebooting the actual radios to see if that changes anything, but I really don't think that would make a difference.
The Unimus server is a windows 10 64bit fully updated xeon server.
After the update, I have 5 devices that now always show backup failed when they worked before.
I've tried deleting these devices and re-adding them and still, the backup fails.
I have other devices in the same subnets that backup fine.
From the Unimus server, I can both ping and ssh into the devices fine.
They are 1 rocket M5 and 4 rocket M2 radios.
I have other rocket M5 and M2 radios that backup fine, running that same firmware as the failing ones.
In the logfile I get the following:
2019-07-30 12:57:55.778 WARN 4216 --- [backup-2] n.u.c.d.v.u.UbntUniversalBackupDriver : Output recognition timeout reached while trying to talk to IP ADDRESS HERE!
2019-07-30 12:57:55.778 WARN 4216 --- [backup-2] n.u.c.d.v.u.UbntUniversalBackupDriver : Unable to download backup from 'IP ADDRESS HERE' - 'Expect operation fails (timeout: 95000 ms) for matcher: anyOf(regexp('(?i)(?:wrong|invalid|incomplete|incorrect|bad|ambiguous|unrecognized|unsupported|unknown|no matching) (?:command|input|usage|action|entry)|(?:not enough|invalid|bad) (?:parameters?|arguments?)|command (?:unknown|failed)|command.+(?:not found|not recognized|not supported|not available)|parsing error|command parser? error|(?:failed|not possible).+(?:check|try) again|expected end of command|sh: .+: not found|(?m)^(?-m)failure:.+|\^ ?(?:keyword|command|input) mis[- ]?match|syntax error.+|invalid syntax'),regexp('(?i)(?:permission|access) (?:denied|refused|forbidden)|(?:don't|doesn't|do not|does not) have (?:permission|access|authorization)|(?:bad|invalid|incorrect) (?:secrets?|password)|authorization (?:failed|failure|denied|refused)'),regexp('(?i).+: .+: (?:no such file|not found)'),TailingRegexp('(?i)(?m)^(?-m)\d?(?:X[MWCS]|WA|TI|AF.*?|SW|US|BZ)\d?(?:\.v\d+?\.\d+?(?:\.\d+?){0,2}(?:-[Uu]\d+?|-RC.*?|-beta.*?|-cpu.*?)?)?# $', 250))'!
But like I said from the command line on the Unimus server I can both ping said IP address and SSH into it from the command line.
So I'm not sure what to check next.
The one thing I have not tried is rebooting the actual radios to see if that changes anything, but I really don't think that would make a difference.
The Unimus server is a windows 10 64bit fully updated xeon server.