[Solved] Unimus Core configuration

Unimus support forum
Post Reply
HaydenH
Posts: 1
Joined: Tue Jul 09, 2024 12:44 am

Tue Jul 09, 2024 12:49 am

Hi,

I have recently installed a Unimus Core on a remote network so that I can backup some firewalls that are being a single NAT. As far as I can see there is no GUI once it has been installed to try and add the firewalls. How does the Unimus core discover these devices? Would it search for them with their private IP addresses?

Kind regards,
Hayden.
User avatar
Tomas
Posts: 1274
Joined: Sat Jun 25, 2016 12:33 pm

Tue Jul 09, 2024 1:03 am

HaydenH wrote:
Tue Jul 09, 2024 12:49 am
I have recently installed a Unimus Core on a remote network so that I can backup some firewalls that are being a single NAT. As far as I can see there is no GUI once it has been installed to try and add the firewalls. How does the Unimus core discover these devices? Would it search for them with their private IP addresses?
Hi, the Core is just a job proxy / remote agent / remote poller (it seems like everyone has their own name for this). Everything is managed from within your main Unimus' server GUI. In the Zones menu, you should have a Zone and the Core should be Online in that Zone. Then you just normally add and manage devices in Unimus, just make sure they are assigned to the Zone that your Core is responsible for handling.

You can also review these Wiki articles:
https://wiki.unimus.net/display/UNPUB/A ... e+overview
https://wiki.unimus.net/display/UNPUB/Zones
Post Reply