It wiped my slack configuration. (which I just read was expected so ignore. .
2 - I decided to try it with a Calix E7. It did log in correctly, was able to get into enable mode but then it states that it is unsupported. I'm on the latest V20 firmware.
2 Issues with 2.0
Hi,
Yes, Slack configuration being wiped is indeed expected, A Slack Bot is now required due to full config change notification support over Slack.
As for Calix, can you please enable both "Debug Logging" and "Device Output Logging"?
(Zones > Default > Debug Mode)
Please run a discovery after both are enabled, and wait for it to fail.
After it fails, please download both log files, and create a ticket with the logs on our Portal.
We will check out why your E7 doesn't work - it is likely the incompatibility of our current Calix driver with the v20 firmware.
Our current Calix driver was written against an E7 running the v13 firmware - so it's quite possible the driver needs adjustments.
Yes, Slack configuration being wiped is indeed expected, A Slack Bot is now required due to full config change notification support over Slack.
As for Calix, can you please enable both "Debug Logging" and "Device Output Logging"?
(Zones > Default > Debug Mode)
Please run a discovery after both are enabled, and wait for it to fail.
After it fails, please download both log files, and create a ticket with the logs on our Portal.
We will check out why your E7 doesn't work - it is likely the incompatibility of our current Calix driver with the v20 firmware.
Our current Calix driver was written against an E7 running the v13 firmware - so it's quite possible the driver needs adjustments.