2 Issues with 2.0

Unimus support forum
Post Reply
StevenK
Posts: 13
Joined: Wed Nov 15, 2017 2:37 pm

Wed May 20, 2020 3:06 pm

It wiped my slack configuration. (which I just read was expected so ignore. .

2 - I decided to try it with a Calix E7. It did log in correctly, was able to get into enable mode but then it states that it is unsupported. I'm on the latest V20 firmware.
User avatar
Tomas
Posts: 1206
Joined: Sat Jun 25, 2016 12:33 pm

Wed May 20, 2020 3:42 pm

Hi,

Yes, Slack configuration being wiped is indeed expected, A Slack Bot is now required due to full config change notification support over Slack.

As for Calix, can you please enable both "Debug Logging" and "Device Output Logging"?
(Zones > Default > Debug Mode)

Please run a discovery after both are enabled, and wait for it to fail.
After it fails, please download both log files, and create a ticket with the logs on our Portal.

We will check out why your E7 doesn't work - it is likely the incompatibility of our current Calix driver with the v20 firmware.
Our current Calix driver was written against an E7 running the v13 firmware - so it's quite possible the driver needs adjustments.
Post Reply