Unimus forum

Posted: **Thu Jun 11, 2020 4:35 pm**

Hello All, I have another set of items I have run across that are detected as changes.

The command "show vlan brief" that is run with Cisco IOS switches is being detected as a configuration change, when I think it should be detected as dynamic content. The text being detected changes based off of what is plugged into the interface, so I don't see any value in having this detected as a change. I have attached a screenshot showing the change:

: unimus_IOS_ShowVLAN.png (246.77 KiB) Viewed 2884 times

Additionally, on certain IOS XE platforms, when you run a show command it will include the load statistics (very annoying that they do that, IMO.) This is also being detected as a change when running "show vlan brief:"

: unimus_IOS_ShowVLAN2.png (106.96 KiB) Viewed 2884 times

Thank You!

Posted: **Tue Jun 16, 2020 11:40 pm**

Hi,

Apologies it took this long to get a reply out.

With Unimus 2.0.2, we fixed the change notifications on the load statistics and time on IOS XE.
This should no longer be considered as changes in 2.0.2 or later.

We discussed with the team at length what to do about the VLAN changes.
We are still looking into how to best solve this, I will update the topic as soon as we have a definite answer on this.

Unimus forum

Cisco IOS "show vlan brief" changes detected

Cisco IOS "show vlan brief" changes detected

Re: Cisco IOS "show vlan brief" changes detected