Page 1 of 1
[Solved] Mass tagging
Posted: Tue Nov 19, 2019 3:19 pm
by tommyd
Is there a way to add a tag to multiple devices at once? For example for devises displayed in Devices > Search.
Re: Mass tagging
Posted: Tue Nov 19, 2019 3:37 pm
by Tomas
Yes, you can use "Device tags > select a tag > Tag devices".
You can select multiple devices as needed, search, etc.
Is that what you were looking for?
Re: Mass tagging
Posted: Wed Nov 20, 2019 3:24 pm
by tommyd
Yes, you can use "Device tags > select a tag > Tag devices".
I was expecting the other way i.e. "find/select devices > add tad" but this also ok
Re: Mass tagging
Posted: Wed Nov 20, 2019 5:18 pm
by Tomas
In the Devices page, you can select a device and add tags to it.
This is meant when you want to add multiple tags to a single devices.
In the Tags page, you can select a tag and tag devices with it.
This is meant when you want to tag multiple devices with a single tag.
We made it this way so it's possible to both tag a device with multiple tags, or tag multiple devices with a single tag.
(each operation being done on their respective screens)
Happy to hear if you have any suggestions on how to handle this better