Supported vendors/devices

General discussion of anything Unimus
walterua
Posts: 2
Joined: Mon Oct 23, 2017 4:53 pm

Mon Oct 23, 2017 4:59 pm

Hi Tomas,

I was testing your product and I was not able to discover any Brocade ICX switches with it. Is this support is not implemented yet?

BTW great product otherwise.

Thank you
Vlad
User avatar
Tomas
Posts: 1206
Joined: Sat Jun 25, 2016 12:33 pm

Mon Oct 23, 2017 5:04 pm

walterua wrote:
Mon Oct 23, 2017 4:59 pm
I was testing your product and I was not able to discover any Brocade ICX switches with it. Is this support is not implemented yet?

BTW great product otherwise.
Hi!

Do you know what OS these switches run?
We currently support Brocade NOS and FOS.

If it's something we don't have support for yet, we will be happy to add it.

Glad to hear you like Unimus so far.
walterua
Posts: 2
Joined: Mon Oct 23, 2017 4:53 pm

Tue Oct 24, 2017 3:21 pm

Hi Tomas,

I'm positive they are running FastIron OS (FOS) but for some reason they are not recognized. Here is a quick show ver. from one of them. We have about 35-40 of these in our network, same OS (firmware version) on all of them.

SSH@CA-YWG-167L-SBBBR-168-41>sh version
Copyright (c) 1996-2015 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Jan 26 2016 at 22:09:49 labeled as SPS08030f
(28688580 bytes) from Primary SPS08030f.bin
SW: Version 08.0.30fT211
UNIT 2: compiled on Jan 26 2016 at 22:09:49 labeled as SPS08030f
(28688580 bytes) from Primary SPS08030f.bin
SW: Version 08.0.30fT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.05T215 (spz10105)
HW: Stackable ICX7450-24
Internal USB: Serial #:
Vendor: ATP Electronics, Total size = 1919 MB
==========================================================================
UNIT 1: SL 1: ICX7450-24 24-port Management Module
Serial #:
License: BASE_SOFT_PACKAGE (LID: eavIIHLoFJF)
P-ASIC 0: type B548, rev 01 Chip BCM56548_A0
==========================================================================
UNIT 1: SL 2: ICX7400-4X10GF 4-port 40G Module
Serial #:
==========================================================================
UNIT 1: SL 3: ICX7400-4X10GF 4-port 40G Module
Serial #:
==========================================================================
UNIT 1: SL 4: ICX7400-4X10GF 4-port 40G Module
Serial #:
==========================================================================
UNIT 2: SL 1: ICX7450-48 48-port Management Module
Serial #:
License: BASE_SOFT_PACKAGE (LID: easIIFNpFIm)
==========================================================================
UNIT 2: SL 2: ICX7400-4X10GF 4-port 40G Module
Serial #:
==========================================================================
UNIT 2: SL 3: ICX7400-4X10GF 4-port 40G Module
Serial #:
==========================================================================
UNIT 2: SL 4: ICX7400-4X10GF 4-port 40G Module
Serial #:
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
2048 MB DRAM
STACKID 1 system uptime is 136 day(s) 21 hour(s) 25 minute(s) 13 second(s)
STACKID 2 system uptime is 123 day(s) 20 hour(s) 39 minute(s) 18 second(s)
The system started at 13:02:57 Central Fri Jun 09 2017


Regards,
Vlad
User avatar
Tomas
Posts: 1206
Joined: Sat Jun 25, 2016 12:33 pm

Tue Oct 24, 2017 4:48 pm

Hi,

The Brocade FOS we support is the FabricOS
https://en.wikipedia.org/wiki/Fabric_OS

As I mentioned previously, we will be happy to add support for FastIron OS as well.

Could you please provide SSH access to one of these in a lab environment?
(we need this for driver development)

If this would be possible, please send me a PM to work out the details.

Thanks!
leisser
Posts: 1
Joined: Thu Oct 26, 2017 7:11 am

Thu Oct 26, 2017 9:24 am

MHammett wrote:
Fri Mar 17, 2017 3:42 pm
I don't believe Mimosa configurations are available via CLI. I've asked a time or two. If they are, I can capture the info and get it over.

Hello Any news with Mimosa radios?
Tnx
User avatar
Tomas
Posts: 1206
Joined: Sat Jun 25, 2016 12:33 pm

Thu Oct 26, 2017 12:21 pm

leisser wrote:
Thu Oct 26, 2017 9:24 am
Hello Any news with Mimosa radios?
Tnx
Checked with latest Mimosa firmware, still no CLI available :(
niqx
Posts: 1
Joined: Thu Nov 02, 2017 8:52 am

Thu Nov 02, 2017 9:13 am

Hi Tomas,

First off - Great work with Unimus. Very handy.

We're running a WISP in Sweden and use alot of Siklu for BackHauling.

They support SSH and you can get running-configuration by writing "copy running-configuration display" and you get the output in the CLI.

I tried this on Siklu600 and Siklu1200, working on both.


Not sure if this is the correct thread for feature requests. You can PM me if you want access to a device and try it out.
SeanCTS
Posts: 60
Joined: Thu Nov 02, 2017 7:29 pm
Location: Orlando, FL

Thu Nov 02, 2017 7:45 pm

Tomas wrote:
Tue Oct 24, 2017 4:48 pm
Hi,

The Brocade FOS we support is the FabricOS
https://en.wikipedia.org/wiki/Fabric_OS

As I mentioned previously, we will be happy to add support for FastIron OS as well.

Could you please provide SSH access to one of these in a lab environment?
(we need this for driver development)

If this would be possible, please send me a PM to work out the details.

Thanks!
I have a FastIRON series in a lab that you could use. Do you just need SSH access?
User avatar
Tomas
Posts: 1206
Joined: Sat Jun 25, 2016 12:33 pm

Thu Nov 02, 2017 8:02 pm

SeanCTS wrote:
Thu Nov 02, 2017 7:45 pm
I have a FastIRON series in a lab that you could use. Do you just need SSH access?
We have already implemented support for FastIron, with some much appreciated help from walterua :)
It will be released in 1.4.0.

Here is a link to a dev build which contains the FastIron driver:
https://goo.gl/Hs5GCR

If you could test this on your devices and let me know if it works as expected, that would be much appreciated.

Thanks!
User avatar
Tomas
Posts: 1206
Joined: Sat Jun 25, 2016 12:33 pm

Wed Nov 08, 2017 10:12 pm

List updated with release of 1.4.0.
Post Reply