Supported vendors/devices

[Innova]

hi, we discuss to use this solution but we miss sophos xgs support - is there any way to add this?

[Tomas]

hi, we discuss to use this solution but we miss sophos xgs support - is there any way to add this?

Hi, Sophos XGS is already available in the 2.9.0-Beta:
viewtopic.php?f=4&t=2253

2.9.0 will go into stable likely next week

[sdc]

Are the Ubiquiti UISP line of switches supported? They are effectively the same configuration as the Ubiquiti EdgeSwitch line but I have not had success with setting them up. They operate the same interface as the Edgeswitch and have SSH enabled.

[Tommy.c]

Below you will find our supported devices. We do offer support for Unifi devices, though you must enable SSH on them and have the correct credentials setup in Unimus for it to access them. I would verify those credentials if you are having issues. If you add a device and are unable to perform actions on it, you can always run a discovery and it will tell you where Unimus is struggling. If you enable device output logging (temporarily) for the Zone your devices are in you can see the exact output and where Unimus was unable to finish the discovery.

https://wiki.unimus.net/pages/viewpage. ... d=10092755

[Laco]

supported devices list contains:
"Alcatel OmniSwitch switches"
... seems only WindRiver-based AlcatelOS Version6 - devices are supported ... for Linux-Based Omniswitches with AlcatelOS Version8
.
INFO 506 --- [discovery-3] n.u.c.s.d.p.info.ResultManipulator : Discovery reports an unsupported device on 'aaa.bb.ccc.d'
.
what is needed to lift these devices to the supoorted-devices list ?

Hi,
We're in the middle of developing driver support for the AOS version 8 Omniswitches (69xx, 68xx, 63xx etc.). To ensure support could you provide 'show chassis' output including "Model Name" line and/or 'show system' output including "Description" line?

Unimus 2.9.0 has been released.
This version also includes support for Alcatel AOS version 8.