Page 1 of 1

[BETA] 1.8.3 beta thread

Posted: Fri Aug 10, 2018 1:50 pm
by Tomas
UPDATE: 1.8.3 has been released, and this topic has been locked.

This is a beta release of version 1.8.3-beta5 intended for testing purposes.

1.8.3 continues updates to the 1.8 release branch, and as such, there are no major features present.
Quite a few improvements to existing features are however present.
(and as always, we continue to fix any issues/bugs that are found)

Please check out the full changelog below to learn more.

We test the beta releases as best as possible, but bugs may be present.
For general usage, we recommend customers run current STABLE release.

You can download the Beta build here:
https://goo.gl/3ZhYuf
= Version 1.8.3 =
Features:
Trailing spaces will now be automatically stripped from output of Mass Config Push
Added an option to configure number of context lines in diffs in configuration change notifications
Added options to clone "Mass Config Push" and "Network Scan" presets
Cisco IOS devices will now be discovered even if "show version" is not available in user-exec mode
Added support for devices that require pressing ENTER before logging in over Telnet
Improved support for HPE / Aruba ProCurve stacks
Improvements to the "Show backup" window
Visual updates to the "Notifications" screen
Added a system entropy check during startup - will notify if system entropy is low

New Powercode importer (NMS sync)
- allows synchronizing devices from Powercode to Unimus
- you can configure which devices to pull into Unimus in Powercode

New "Debug mode" settings:
- added options to change debug levels during runtime
- added options to enable device communication logging during runtime
- the log file can now be downloaded directly from the GUI
- the device communication log file can now be downloaded directly from the GUI
- deleting the device communication log file is also possible directly from the GUI

New "Show all passwords" feature:
- this features makes it easier to work in environments where many credentials have the same username
- usable in "Credentials" and "Bind credentials..." screens
- when enabled, also enables search within passwords

"Mass Config Push" feature improvements:
- presets can now be cloned, renamed and deleted from the home screen
- ability to re-run a push on an output group
- ability to set devices in output group as push target
- ability to clone a preset and set devices in output group as push target

Added support for:
- AudioCodes Mediant
- more variants of Dell PowerConnect
- DragonWave Horizon Compact
- DragonWave Horizon Compact+
- F5 BIG-IP
- F5 BIG-IQ

Fixes:
Fixed Unimus not properly reconnecting to the database after the database went down
Fixed incorrect configuration change notifications for Cambium ePMP (again)
Fixed more rare incorrect configuration change notifications for FortiOS
It is no longer possible to add negative numbers as ports in connector settings
Fixed wrong notification formatting for notifications that contained un-managed devices
Fixed Mass Config Push and Network Scan preset creation data disappearing for unsaved presets
Fixed Network Scan preset subnets area to trigger configuration validation on text change event, not focus out event
Fixed a regression that caused MikroTik RouterOS not being discovered if it asked to show EULA at login
Fixed NMS config still present after 'clear' and re-open the config widget
Fixed URL validation not properly validating contents of URL

Tickets closed by this release:
UN-338, UN-340, UN-344, UN-347, UN-352, UN-354, UN-355, UN-358, UN-359

Migration warnings:
Radius accounts must now be created in Unimus, and have their authentication method set to Radius.
If you are migrating from previous versions and use a Radius account to log in to Unimus, you must
first create that account in Unimus and properly set its auth method. Use a local admin account
to create this Radius account.

Known issues:
Special characters can be replaced by '?' under specific circumstances

Re: [BETA] 1.8.3 beta thread

Posted: Wed Aug 15, 2018 10:45 am
by Tomas
1.8.3-beta2 is released today.
Original post updated to reflect this.

Changes from beta1:

Code: Select all

Features:
  Added support for:
    - F5 BIG-IP
    - F5 BIG-IQ

Fixes:
  Fixed Unimus not properly reconnecting to the database after the database went down

Re: [BETA] 1.8.3 beta thread

Posted: Mon Aug 20, 2018 4:54 pm
by Tomas
1.8.0-beta3 is released today.
Original post updated to reflect this.

Changes from beta2:

Code: Select all

Features:
  Cisco IOS devices will now be discovered even in "show version" is not available in user-exec mode
  Added support for devices that require pressing ENTER before logging in over Telnet
  Improvements to the "Show backup" window

  "Mass Config Push" feature improvements:
    - presets can now be cloned, renamed and deleted from the home screen
    - ability to re-run a push on an output group
    - ability to set devices in output group as push target
    - ability to clone a preset and set devices in output group as push target

  Added support for:
    - DragonWave Horizon Compact

Re: [BETA] 1.8.3 beta thread

Posted: Tue Sep 04, 2018 7:32 pm
by Tomas
1.8.3-beta4 is released today.
Original post updated to reflect this.

Changes from beta3:

Code: Select all

Features:
  Added options to clone "Mass Config Push" and "Network Scan" presets
  Improved support for HPE / Aruba ProCurve stacks
  Visual updates to the "Notifications" screen
  Added a system entropy check during startup - will notify if system entropy low

  New "Debug mode" settings:
    - added options to change debug levels during runtime
    - added options to enable device communication logging during runtime
    - the log file can now be downloaded directly from the GUI
    - the device communication log file can now be downloaded directly from the GUI
    - deleting the device communication log file is also possible directly from the GUI

  New "Show all passwords" feature:
    - this features makes it easier to work in environments where many credentials have the same username
    - usable in "Credentials" and "Bind credentials..." screens
    - when enabled, also enables search within passwords

  Added support for:
    - AudioCodes Mediant
    - DragonWave Horizon Compact+

Re: [BETA] 1.8.3 beta thread

Posted: Mon Sep 10, 2018 5:48 pm
by Tomas
1.8.3-beta5 is released today.
Original post updated to reflect this.

Changes from beta4:

Code: Select all

Features:
  New Powercode importer (NMS sync)
    - allows synchronizing devices from Powercode to Unimus
    - you can configure which devices to pull into Unimus in Powercode

Fixes:
  Fixed NMS config still present after 'clear' and re-open the config widget
  Fixed URL validation not properly validating contents of URL