[BETA] 1.8.0 beta thread

Beta release announcements and discussion around them
Locked
User avatar
Tomas
Posts: 1267
Joined: Sat Jun 25, 2016 12:33 pm

Tue May 29, 2018 6:39 pm

UPDATE: 1.8.0 has been released, and this topic has been locked.

This is a beta release of version 1.8.0-beta4 intended for testing purposes.

In this release, we have rewritten and upgraded our device discovery implementation.
It will be much faster, consume less CPU, and be more reliable in general.

Another new feature are Configuration Change Notifications.
Unimus will now send you a notification when it detects a change in the config of any of your devices.

We have also added support for defining Access Roles and Access Tags to Radius accounts.
Last but not least, we have implemented multi-device edit, so binding credentials (or doing other bulk changes) is much easier.

MIGRATION WARNING:
Radius accounts must now be created in Unimus, and have their authentication method set to Radius.
If you are migrating from previous versions and use a Radius account to log in to Unimus, you must first create then account in Unimus and properly set its auth method. Use a local admin account to create this Radius account.

We test the beta releases as best as possible, but bugs may be present.
For general usage, we recommend customers run current STABLE release.

You can download the Beta build here:
https://goo.gl/PZK4gR

Changelog:
= Version 1.8.0 =
Features:
Added multi-device Edit - edit schedule, bound credentials and enable/configure passwords on several devices at once
Added support for additional crypto / hashing / DH algorithms - adds compatibility with more devices
Improved handling of failed Enable / Configure mode switch during discovery
Improved model detection for Fiberstore / GCOM switches
Cosmetic improvements to "Access Tags" screen

Added configuration change notifications:
- a notification will be sent when Unimus detects a config change on a device
- enabled by default, configurable in the "Notifications" screen

Improvements to the "Mass config push" feature:
- Improved detection of yes / no ("[Y/N]") prompts in "Mass config push"
- Improved "Mass config push" compatibility with slow devices

Performance improvements:
- Improved the speed of Discovery, Backup and Mass Config Push processes
- General improvements and optimizations for connections to older / slow devices
- CPU utilization improvements - optimized many aspects of device communication

Changed how Radius user authentication is handled:
- Radius accounts now have to be defined as local application accounts, with auth method set to Radius
- Added support for specifying an Access Role for Radius accounts
- Added support for tagging Radius accounts with Access Tags

Added support for:
- Araknis switches
- Dell EMC OS10
- Dell switches (OS10)
- HP BladeSystem OA
- Huawei Quidway switches
- Ruckus standalone APs

Fixes:
Fixed some Brocade, Foundry and Ruckus ICX devices not working when user logged into user-exec mode
Fixed not properly stripping pagination from backups of some Cisco WLCs
Fixed errors during Discovery in various edge-cases when using SSH
Fixed not setting reverse DNS as device description with automatic device addition from Network scan
Fixed failing discovery on devices that didn't exit out of "Password: " prompts after CTRL+C
Fixed re-discovery not being triggered in certain cases when connector configs change
Fixed wrongly showing a successful notification in the GUI when a backup actually failed
Fixed discovery could sometimes report wrong Vendor / Type for some devices
Fixed Audiocodes devices not being discovered / backed up when there was no previous login
Fixed a very rare case of discovery failing when adding/removing same device

Tickets closed by this release:
UN-252, UN-299, 317, UN-328,

Migration warnings:
Radius accounts must now be created in Unimus, and have their authentication method set to Radius.
If you are migrating from previous versions and use a Radius account to log in to Unimus, you must
first create then account in Unimus and properly set its auth method. Use a local admin account
to create this Radius account.

Known issues:
Special characters can be replaced by '?' under specific circumstances
User avatar
Tomas
Posts: 1267
Joined: Sat Jun 25, 2016 12:33 pm

Wed Jun 06, 2018 9:54 pm

1.8.0-beta2 is released today.
Original post updated to reflect this.

Changes from beta1:

Code: Select all

Features:
  CPU utilization improvements - optimized many aspects of device communication
  Cosmetic improvements to "Access Tags" screen

  Added support for:
    - Araknis switches
    - Ruckus standalone APs

Fixes:
  Fixed some Brocade, Foundry and Ruckus ICX devices not working when user logged into user-exec mode
  Fixed not properly stripping pagination from backups of some Cisco WLCs
  Fixed re-discovery not being triggered in certain cases when connector configs change
  Fixed wrongly showing a successful notification in the GUI when a backup actually failed
  Fixed discovery could sometimes report wrong Vendor / Type for some devices
  Fixed Audiocodes devices not being discovered / backed up when there was no previous login
User avatar
Tomas
Posts: 1267
Joined: Sat Jun 25, 2016 12:33 pm

Sun Jun 10, 2018 12:14 pm

1.8.0-beta3 is released today.
Original post updated to reflect this.

Changes from beta2:

Code: Select all

Features:
  Added support for:
    - Dell EMC OS10
    - Dell switches (OS10)
    - HP BladeSystem OA
User avatar
Tomas
Posts: 1267
Joined: Sat Jun 25, 2016 12:33 pm

Tue Jun 12, 2018 8:03 pm

1.8.0-beta4 is released today.
Original post updated to reflect this.

Changes from beta3:

Code: Select all

Features:
  Added multi-device Edit - ability to edit schedule, bound credentials and enable/configure passwords on several devices at once
  
    Added configuration change notifications:
    - a notification will be sent when Unimus detects a config change on a device
    - enabled by default, configurable in the "Notifications" screen

Fixes:
  Fixed a very rare case of discovery failing when adding/removing same device
Locked