Unimus forum

The configs on these are very similar to ios. SSH in, show run... also same tftp commands

The models we use in our environment are the SF and SG 300 and 500 series.

I can get a device up and running for you if you like.

JJ

If you can provide SSH access to them, I will gladly implement support.

Feel free to PM me to work out the details.

Implemented, will be a part of 0.2.3 release.

Awesome!! Thanks!

Finally getting time to get back to testing all of this.

The Sx300 models seem to be recognized just fine. The Sx500 models are coming up as unable to identify. They're the exact same CLI. The major difference is that the interface numbering is 1/1/1, 1/1/2, etc.

jjonesjr wrote:Finally getting time to get back to testing all of this.

The Sx300 models seem to be recognized just fine. The Sx500 models are coming up as unable to identify. They're the exact same CLI. The major difference is that the interface numbering is 1/1/1, 1/1/2, etc.

Any chance of getting SSH access to one of the 500s to debug and fix?

I'll try to get my hands on one. Will be in touch. Thanks!

I found a spare SG500 that a client was nice enough to let me borrow. I've PM'd you the info to access it.

Thanks,

Jim

Support for the 500 series added:
https://tracker.unimus.net/browse/UN-66

Will be released in 0.3.0.

Thanks a lot for the access to the device!

You are very welcome! Thanks for making it work!