Mass Config Push Results

Post your feature requests here
Post Reply
dbolton
Posts: 12
Joined: Mon Jan 18, 2021 2:41 pm

Wed Feb 14, 2024 7:00 pm

I have a push script that runs several additional commands to retrieve more detailed output instead of just configurations. Instead of the synopsis of completed push results, it would be nice to have the actual output results sent via email.

Current email notification:
Group: Output-1 | Devices: 1
Group: Output-2 | Devices: 1
Group: Output-3 | Devices: 1
Group: Output-4 | Devices: 1
Group: Output-5 | Devices: 1

Wanted email notification: (partial example of added show commands)
show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 OK
FPC 1 Power Supply 0 OK
FPC 1 Power Supply 1 OK
FPC 2 Power Supply 0 OK
FPC 2 Power Supply 1 OK
Temp FPC 0 Sensor TopMiddle E OK 25 degrees C / 77 degrees F
FPC 0 Sensor TopRight C OK 25 degrees C / 77 degrees F
FPC 0 Sensor TopLeft C OK 38 degrees C / 100 degrees F
FPC 0 Sensor TopRight E OK 25 degrees C / 77 degrees F
FPC 0 Sensor CPURight C OK 26 degrees C / 78 degrees F
FPC 0 Sensor CPULeft E OK 25 degrees C / 77 degrees F
FPC 0 Sensor CPU Die Temp OK 40 degrees C / 104 degrees F
FPC 1 Sensor TopMiddle E OK 25 degrees C / 77 degrees F
FPC 1 Sensor TopRight C OK 25 degrees C / 77 degrees F
FPC 1 Sensor TopLeft C OK 40 degrees C / 104 degrees F
FPC 1 Sensor TopRight E OK 24 degrees C / 75 degrees F
FPC 1 Sensor CPURight C OK 26 degrees C / 78 degrees F
FPC 1 Sensor CPULeft E OK 25 degrees C / 77 degrees F
FPC 1 Sensor CPU Die Temp OK 41 degrees C / 105 degrees F
FPC 2 Sensor TopMiddle E OK 28 degrees C / 82 degrees F
FPC 2 Sensor TopRight C OK 28 degrees C / 82 degrees F
FPC 2 Sensor TopLeft C OK 41 degrees C / 105 degrees F
FPC 2 Sensor TopRight E OK 27 degrees C / 80 degrees F
FPC 2 Sensor CPURight C OK 29 degrees C / 84 degrees F
FPC 2 Sensor CPULeft E OK 28 degrees C / 82 degrees F
FPC 2 Sensor CPU Die Temp OK 40 degrees C / 104 degrees F
Fans FPC 0 Fan Tray 0 OK Spinning at normal speed
FPC 0 Fan Tray 1 OK Spinning at normal speed
FPC 0 Fan Tray 2 OK Spinning at normal speed
FPC 0 Fan Tray 3 OK Spinning at normal speed
FPC 0 Fan Tray 4 OK Spinning at normal speed
FPC 1 Fan Tray 0 OK Spinning at normal speed
FPC 1 Fan Tray 1 OK Spinning at normal speed
FPC 1 Fan Tray 2 OK Spinning at normal speed
FPC 1 Fan Tray 3 OK Spinning at normal speed
FPC 1 Fan Tray 4 OK Spinning at normal speed
FPC 2 Fan Tray 0 OK Spinning at normal speed
FPC 2 Fan Tray 1 OK Spinning at normal speed
FPC 2 Fan Tray 2 OK Spinning at normal speed
FPC 2 Fan Tray 3 OK Spinning at normal speed
FPC 2 Fan Tray 4 OK Spinning at normal speed
erik.k
Posts: 14
Joined: Wed Feb 07, 2024 8:16 am

Fri Feb 16, 2024 9:20 am

Hi. Your improvement suggestion for MCP notification result was added to our backlog. I can't provide an ETA on this at the moment, but we will plan to work on it based on development capacity.
Post Reply